CONTACT US

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Jakarta Office : 021-45850618


   Surabaya Office :  031-8421264

 
Fluke 6332A / 7342A Temperature Calibration Bath

Features

Fast, 0.01 °C stability baths backed by Fluke metrology, with a deep tank for calibrating PRTs and liquid-in-glass thermometers

The 6332A / 7342A Temperature Calibration Baths are ideal for lab managers and technicians in government, corporate, and independent calibration labs who need a bath with good stability, uniformity, and speed to temperature for calibrating thermometers and sensors of various sizes and shapes. Two models cover a wide temperature range from –40 °C to 300 °C. These baths offer a large 145 mm tank diameter with plenty of immersion depth required to calibrate industrial PRTs, thermistors, thermocouples, sanitary sensors, transmitters, and liquid-in-glass thermometers.


The 6332A / 7342A baths are designed for the customer who wants a quality bath backed by Fluke metrology at an affordable price. These baths give you secondary standards level performance, quality design that’s built to last, and many features and accessories that improve lab efficiency and productivity..

Key features

  • Wide temperature range
    • 6332A: 50 °C to 300 °C
    • 7342A: –40 °C to 150 °C
  • Stability 0.01 °C
  • Uniformity (working area)
    • 6332A: 0.015 °C (50 °C to 200 °C), 0.02 °C (201 °C to 300 °C)
    • 7342A: 0.01 °C (full range)
  • Fast heating and cooling times: Heating rate maximum 1.8 °C/minute. Cooling rate maximum 1.1 °C/minute.
  • Large tank area: diameter 145 mm (5.7 inches) by depth 450 mm (17.7 inches)
  • Programmable setpoint temperatures and ramp rates
  • Adjustable fluid level
  • Temperature stability indicator lets you know when the bath is ready to use

Specs

General Specifications
Size Height: 1080 mm (42.5 in)
Width:  445 mm (17.5 in)
Depth:  495 mm (19.5 in)
Weight 6332A:  26 kg (57.3 lb)
7342A:  50 kg (110.2 lb)
Fluid Volume 12 liters (3.2 gallons)
Inner Tank Diameter 145 mm (5.7 in)
Maximum Fluid Depth 450 mm (17.7 in)
Temperature Specifications
  6332A 7342A
Range (at 23 °C ambient temperature) 50 °C to 300 °C –40 °C to 150 °C
Maximum Display Error 1.0 °C 1.0 °C
Temperature Stability 0.01 °C 0.01 °C
Temperature Uniformity (working area) 0.015 °C, 50 °C to 200 °C
0.02 °C, 201 °C to 300 °C
0.01 °C (full range)
Heating Time 25 °C to 300 °C (silicone oil, 710): 165 min
 
–40 °C to 25 °C (ethanol): 35 min
25 °C to 150 °C (silicone oil, 200.50): 75 min
Cooling Time 300 °C to 80 °C (silicone oil, 710): 825 min 150 °C to 25 °C (silicone oil, 200.50): 110 min
25 °C to –40 °C (ethanol): 135 min
Stabilization Time 20 minutes 20 minutes
Factory Calibration Limited range calibration traceable to the SI through a national metrology institute Limited range calibration traceable to the SI through a national metrology institute
 
For full product specifications, please refer to the 6332A/7342A Specifications documen

Models

Model Name Description
6332A

Isothermal Calibration Bath, 50 °C to 300 °C

7342A

Isothermal Calibration bath, -40 °C to 150 °C

Accessories

Accessory Description
7342-2090

Readout Shelf Fixture

7342-2050

Adjustable Probe Holding Fixture

7342-2080

Fluid Overflow Kit

7342-2070

Floor Cart

7342-2027-AL

Aluminum Equilibration Block

6332-2082-A

Bath Cover, stainless steel with holes

6332-2082-B

Bath Cover, stainless steel without holes

7342-2007

Condenser Hot Air Duct Fixture (7342A only)

2069

Magnifying Scope for Liquid-in-Glass Thermometer Calibration

Ladbrokes Review L.BetRoll
Top United Kingdom Bookmakers http://betroll.co.uk/