CONTACT US

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Jakarta Office :

021-45850618


Surabaya Office :

031-8421264

 
Phase II 900-331D Digital Hardness Tester

Features

Conforming to ASTM E-18 Rockwell Hardness tester standards, the 900-331D hardness tester will offer unmatched repeatability in all standard Rockwell Hardness scales (table shown below). A perfect, rugged performer suited for any environment including heat treat facilities, tool rooms, workshops, laboratories and inspection labs. Lifetime technical support is included on all Phase II Hardness Testers. So test away with confidence and a level of accuracy you will only find at Phase II.

Features:

  • Direct Digital Reading
  • Automatic conversions to Brinell, Vickers, etc.
  • Advanced design, easy to operate
  • Engineered to obtain highly sensitive and accurate readings
  • Conforms to ASTM E-18 Perfect for laboratories, workshops, tool rooms, inspection labs, etc.

 

Specs

Minor Load 10Kgf
Major Load 60Kgf, 100Kgf, 150Kgf
Test Force Application Dead Weight
Test Force Control Hydraulic Dashpot System
Results Display Digital LCD
Vertical Capacity 6.7 in.
Throat Depth 6.6 in.
Height 30.0 in.
Width 8.50 in.
Depth 20.0 in.
Shipping Weight 242 lbs.

Accessories:

  • C-scale Diamond Indentor
  • 1/16" Ball Indentor
  • 3- HRC Test Blocks
  • 1- HRB Test Block
  • 1-HRA Test Block
  • Test Table 5.87" (150mm)
  • Flat Anvil 2.5" (63mm)
  • Std. Vee Anvil
  • Accessory Case
  • Dust Cover

 

Scale Symbol

Indenter Type
Ball dimensions indicate diameter

Preliminary Force
N (kgf)
Total Force
N (kgf)
Typical Application
A Spheroconical Diamond 98.07 (10) 588.4 (60) Cemented carbides, thin steel and shallow case hardened steel
B Ball 1/16" (1.588mm) 98.07 (10) 980.7 (100) Copper alloys, soft steels, alum. Alloys, malleable iron, etc.
C Spheroconical Diamond 98.07 (10) 1471 (150) Steel, hard cast irons,pearltic malleable iron, titanium, deep case hardened steel & other material harder than HRB 100
D Spheroconical Diamond 98.07 (10) 980.7 (100 Thin steel and medium case hardened steel and pearlitic malleable iron
E Ball - 1/8" (3.175mm) 98.07 (10) 980.7 (100 Cast iron, aluminum&magnesium alloys and bearing metals
F Ball - 1/16" (1.588mm) 98.07 (10) 588.4 (60) Annealed copper alloys, and thin soft sheet metals
G Ball - 1/16" (1.588mm) 98.07 (10) 1471 (150) Malleable irons, copper-nckel-zinc and cupronickel alloys
H Ball - 1/8" (3.175mm) 98.07 (10) 588.4 (60) Aluminum, zinc and lead
K Ball - 1/8" (3.175mm) 98.07 (10) 1471 (150) Bearing metals and other very soft or thin materials. Use smallest ball and heaviest load that does not give anvil effect
L Ball - 1/4" (6.350mm) 98.07 (10) 588.4 (60)
M Ball - 1/4" (6.350mm) 98.07 (10) 980.7 (100)
P Ball - 1/4" (6.350mm) 98.07 (10) 1471 (150)
R Ball - 1/2" (12.70mm) 98.07 (10) 588.4 (60)
S Ball - 1/2" (12.70mm) 98.07 (10) 980.7 (100)
V Ball - 1/2" (12.70mm) 98.07 (10) 1471 (150)


 

 

Ladbrokes Review L.BetRoll
Top United Kingdom Bookmakers http://betroll.co.uk/