|
948i
Up to 48 test points can be scanned for high voltage isolation.
The Solution to Multi-point Automated Hipot Dielectric Testing
Unlimited Scanning Possibilities with 7KV, 10KV, 15KV, 40A, & 70A Switching Modules
When a single 948i Hipot High Voltage Switching System is combined with a Vitrek automated Hipot tester, up to 48 test points can be scanned for high voltage isolation - multiple units work together to increase your test point count. Combine two 948i's for 96 points of switching capability or ten units for 480 point capacity. Expansion possibilities are virtually unlimited. And with voltage switching capability up to 15,000 volts or current switching as high as 70 amps - the 948i can handle just about any test requirement that comes along.
Modular Configuration Assures that Your Requirements are Satisfied
The 948i is easily configured to meet your specific test needs. For starters, select the voltage rating and number of HV switching channels desired. In addition to hipot and IR - do you also need to do continuity or low resistance? How about LCR measurement or 4-wire resistance? The MX modules can be added or customized to allow additional measurement equipment to access the matrix.
In a typical application each test point needs to be bi-polar (high for some tests and low for others), multiply the number of test points in the DUT by two and that is how many relay channels you will need.
A single 948i can accommodate 24 bi-polar test points with three 8 channel cards connected to the high voltage bus and with three 8 channel cards connected to the return bus. To add continuity or low resistance measurement capability to the system, an MX-2 card will allow you to use the matrix for either hipot or low resistance testing. For higher test point counts additional 948i's can be connected to accomplish the task.
Set-Up is a Snap
The 948i is fast and easy to use so there is no excuse for using the hit-and-miss manual probing method of high voltage multi-point Hipot testing. The 948i increases operator safety by reducing exposure to high test voltages while enhancing product quality and reliability. Consistent and repeatable hipot test results are automatically documented making it simple to prove compliance with ISO 9000 quality standards.
Setting up the switching pattern for the 948i is a snap. The standard GPIB interface port allows the system controller to download, verify and activate any desired switching profile you can dream up. Or if you prefer, an optional RS232 interface is also available. And if programming code is not your ideal way of spending the day, Vitrek QuickTest graphical software can get you up and running in no time at all. For those who are looking for a stand alone system the 948i can be controlled directly by the Vitrek 944i in a PC free environment. So, no matter how you like it - Vitrek puts you in control of your automated high voltage test requirement.
Now that there are no more excuses, isn't it about time you automated your high voltage test application?
Features/Benefits
- Voltage Switching Ratings to 7KV, 10KV or 15KV
- Current switching to 40 or 70 Amps
- Reduces operator exposure to high voltage
- Improves test quality, consistency and repeatability
- Enhances end product quality and reliability
- Scans up to 48 points with single compact unit
- GPIB Standard - RS232 no extra charge
- May be controlled directly by Vitrek Hipot Tester
- Available QuickTest™ graphical programming software
- CE mark certified to EN 61010
Download Brochure
|
Product 
