Fluke 430 (discontinued)
Fluke suggest : Fluke 430 Series II

These three-phase power quality meters help you locate, predict, prevent and troubleshoot problems in power distribution systems.

Pinpoint power quality problems faster, safer and in greater detail

These three-phase power quality meters help you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use power quality tools are a - must have - for any person who maintains or troubleshoots three phase power. The new IEC Class A standards for flicker and power quality are built right in to take the guess work out of power monitoring.

Applications

• Frontline troubleshooting - quickly diagnose problems on-screen to get your operation back online
• Predictive maintenance - detect and prevent power quality issues before they cause downtime
• Quality of service compliance - validate incoming power quality at the service entrance
• Long-term analysis - uncover hard-to-find or intermittent issues
• Load studies - verify electrical system capacity before adding loads
• Energy assessments - quantify energy consumption before and after improvements to justify energy saving devices
• Troubleshoot real-time - Analyze the trends using the cursors and zoom tools even while background recording continues
• Highest safety rating in the industry - 600 V Cat IV/1000 V CAT III rated for use at the service entrance
• Automatic transient mode - Captures 200 kHz waveform data on all phases simultaneously: Up to 6 kV
• Fully Class A compliant - Conduct tests according to the stringent international IEC 61000-4-30 Class A standard
• Measure all three phases and neutral - With included four current probes
• AutoTrend - Every measurement you see is always automatically recorded, without any setup
• System-monitor - Up to seven power quality parameters on one screen according to EN50160 power quality standard
• Inrush mode - For troubleshooting nuisance circuit breaker tripping
• View graphs and generate reports - With included analysis software
• Logger function - Configure for any test condition with memory for over 400 parameters at user defined intervals
• Mains signaling - Measure interference from ripple control signals at specific frequencies
• Battery Life - Seven hours operating time per charge on NiMH battery pack