This email address is being protected from spambots. You need JavaScript enabled to view it.


Jakarta Office :


   Surabaya Office :  


Fluke 792A AC/DC Transfer Standard


Support for your most demanding ac traceability requirements


The 792A is an ultra-high accuracy AC/DC Thermal Transfer Standard, designed to meet the most demanding ac traceability requirements. Using the patented Fluke Calibration RMS sensor and thin film range resistors, the 792A offers an extraordinary transfer accuracy, with total uncertainties of as low as ±10 ppm (±5 ppm from the National Institute of Standards and Technology or NIST). The 792A also provides a wide voltage range of 2 mV to 1000V, and a wide frequency range of 10 Hz to 1 MHz.



General Specifications
AC-DC Difference
Range:  2 mV to 1000V
   10 Hz to 1 MHz
Best 1 Year Specification:  ± 10ppm
Temperature Stabilization
   Allow 12 hours stabilization time in the environment of use
Warm up Time
   15 minutes with power on, after stabilization time
Temperature Performance
Operating:  11°C to 35°C;
Calibration:  18°C to 28°C;
Storage:  -40°C to 50°C
Relative Humidity
Operating:  < 75% to 30°C, < 70% to 35°C;
Storage:  < 95%, non-condensing
Operating:  to 3,050 m (10,000 ft);
Non-operating:  to 12,200 m (40,000 ft)
Input Low Isolation
   20V to chassis
Guard Isolation
   10V to input LO or chassis
   Designed to comply with FCC Rules Part 15, Subpart J, Class B; VDE 0871, Class B; VDE 0875, Class K
Line Power
   MIL-STD-28800D, paragraph 3.13.3
Calibration Documentation

Report of calibration with data included; 17025 accredited report or Z520.1 report optional

Transfer Unit:  17.8 cm H x 21.6 cm W x 30.5 cm D (7 in H x 8.5 in W x 12 in D)
Power Pack:  17.8 cm H x 21.6 cm W x 30.5 cm D (7 in H x 8.5 in W x 12 in D)
1000V Range Resistor:  7.6 cm H x 8.9 cm W x 14.0 cm D (3 in H x 3.5 in W x 5.5 in D)
Transfer Switch:  7.6 cm H x 8.9 cm W x 14.0 cm D (3 in H x 3.5 in W x 5.5 in D)
Transfer Unit:  8.4 kg (18.5 lb)
Power Pack:  8.9 kg (19.5 lb)
1000V Range Resistor:  1.6 kg (3.5 lb)
Transfer Switch:  1.6 kg (3.5 lb)


Model NameDescription

AC/DC Transfer Standard including:


  • Power Pack
  • 1000 V Range Resistor
  • Transfer Unit
  • Transfer Switch
  • Instruction Manual
  • Report of Calibration





Low Thermal Test Leads


Low Thermal Copper EMF Plug-In Cables, Spade Connectors


Power Pack


1000V Range Resistor


Transfer Switch






Ladbrokes Review L.BetRoll
Top United Kingdom Bookmakers